Experimental study of the strength of hip endoprosthesis elementsmade by 3D printing

Authors

  • Mykola Korzh Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv, Ukraine https://orcid.org/0000-0002-0489-3104
  • Vasyl Makarov Municipal non-profit enterprise «City Clinical Hospital № 16» of the Dnipro City Council. Ukraine, Ukraine https://orcid.org/0000-0003-0936-7039
  • Mykola Shidlovsky National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine
  • Vladlen Yermakov Debora-Electro LTD, Dnipro. Ukraine, Ukraine
  • Yurii Nikitin Debora-Electro LTD, Dnipro. Ukraine, Ukraine
  • Olga Pidgaiska Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv, Ukraine https://orcid.org/0000-0002-5025-977X
  • Оleksiy Tankut Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv, Ukraine
  • Mykhaylo Karpinsky Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv, Ukraine https://orcid.org/0000-0002-3004-2610
  • Olena Karpinska Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv, Ukraine https://orcid.org/0000-0002-1482-7733
  • Olexandr Zakhovayko National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine
  • Dmytro Chupryna Research and Production Enterprise «A-Tech», Kyiv. Ukraine, Ukraine

DOI:

https://doi.org/10.15674/0030-59872020412-17

Keywords:

3D-printing, additive technology, orthopedic implants, titanium alloy, hip arthroplasty, tensile strength of porous titanium structures

Abstract

Тhree-dimensional printing of porous titanium implants is a promi­sing area of additive production in orthopedic surgery. The question remains relevant mechanical strength and durability of such device. Objective. Determine in the experiment the strength of the stem, the neck of the stem and the cups of hip endoprosthes made by 3D-printing from titanium alloy, and compare with a similar rate of serial implants. Methods. The strength of the stem and cups of hip endoprostheses made by 3D-printing on an Arcam printer from titanium alloy TI6AL4V was studied. Serials hip implants made form titanium alloy. There were 3 samples of hip endoprostheses for each test. Stems of endoprostheses were exa­mined on the TIRATEST-2300 machine under the conditions of loading on a three-point bend, the necks of stems were exami­ned under the influence of combined load on the bend with a shift, the cups were examined on compression. Results. Tensile strength in the case of three-point bending of the stems of implants made by mechanical processing and 3D printing did not have any differences significantly (p = 0.146) and was (1480.62 ± 62.50) MPa and (1396.88 ± 50.90) MPa, respectively. The necks of stems of serial endoprostheses and made by 3D-printing had a comparable limit of strength — (408.61 ± 1.25) MPa and (403.49 ± 8.99) MPa, respectively (p = 0.384). Under the conditions of compression tests of cups of endoprostheses all the samples withstood a load of 98.0 kN without any signs of destruction. Conclusions. The va­lues of the tensile strength of the components of serial implants and those made by 3D-printing did not differ statistically significantly. Thus, 3D-porous structures have significant potential for creation of elements of hip endoprostheses.

Author Biographies

Mykola Korzh, Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv

MD, Prof. in Traumatology and Orthopaedics

Vasyl Makarov, Municipal non-profit enterprise «City Clinical Hospital № 16» of the Dnipro City Council. Ukraine

PhD in Orthopaedics and Traumatology

Olga Pidgaiska, Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv

PhD in Traumatology and Orthopaedics

Оleksiy Tankut, Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv

 PhD in Traumatology and Orthopаedics

Mykhaylo Karpinsky, Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv

 

 

Olena Karpinska, Sytenko Institute of Spine and Joint Pathology National Academy of Medical Sciences of Ukraine, Kharkiv

 

 

References

  1. Arabnejad, S., Johnston, B., Tanzer, M., & Pasini, D. (2016). Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty. Journal of Orthopaedic Research, 35(8), 1774-1783. https://doi.org/10.1002/jor.23445
  2. Mehboob, H., Tarlochan, F., Mehboob, A., Chang, S., Ramesh, S., Harun, W. S., & Kadirgama, K. (2020). A novel design, analysis and 3D printing of ti-6al-4V alloy bio-inspired porous femoral stem. Journal of Materials Science: Materials in Medicine, 31(9). https://doi.org/10.1007/s10856-020-06420-7
  3. Kodama, H. (2014). Background of my invention of 3D printer and its spread. Patent Magazine of Japan Patent Attorneys Association, 67(13), 109-118
  4. Dall’Ava, Hothi, Di Laura, Henckel, & Hart. (2019). 3D printed acetabular cups for total hip arthroplasty: A review article. Metals, 9(7), 729. https://doi.org/10.3390/met9070729
  5. Hothi, H., Dall'Ava, L., Henckel, J., Di Laura, A., Iacoviello, F., Shearing, P., & Hart, A. (2019). Evidence of structural cavities in 3D printed acetabular cups for total hip arthroplasty. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 108(5), 1779-1789. https://doi.org/10.1002/jbm.b.34520
  6. Lewallen, E. A., Riester, S. M., Bonin, C. A., Kremers, H. M., Dudakovic, A., Kakar, S., … & Van Wijnen, A. J. (2015). Biological strategies for improved Osseointegration and Osteoinduction of porous metal orthopedic implants. Tissue Engineering Part B: Reviews, 21(2), 218-230. https://doi.org/10.1089/ten.teb.2014.0333
  7. Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., … & Xie, Y. M. (2016). Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials, 83, 127-141. https://doi.org/10.1016/j.biomaterials.2016.01.012
  8. (2005). DSTU ISO 7438: 2005. "Metal materials. Bending test".
  9. GOST 27208-87. “Cast iron castings. Mechanical Test Methods ("Compression Tests").
  10. Nasledov, A. (2011). SPSS 19 Heritage: Professional Statistical Data Analysis. SnPb: Piter. [in Russian]
  11. Lerner, Z. F., & Browning, R. C. (2016). Compressive and shear hip joint contact forces are affected by pediatric obesity during walking. Journal of Biomechanics, 49(9), 1547-1553. https://doi.org/10.1016/j.jbiomech.2016.03.033
  12. Wang, G., Huang, W., Song, Q., & Liang, J. (2017). Three-dimensional finite analysis of acetabular contact pressure and contact area during normal walking. Asian Journal of Surgery, 40(6), 463-469. https://doi.org/10.1016/j.asjsur.2016.07.002
  13. Murr, L., Quinones, S., Gaytan, S., Lopez, M., Rodela, A., Martinez, E., … & Wicker, R. (2009). Microstructure and mechanical behavior of ti–6al–4V produced by rapid-layer manufacturing, for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 2(1), 20-32. https://doi.org/10.1016/j.jmbbm.2008.05.004
  14. Bondarenko, S., Ashukina, N., Maltseva, V., Ivanov, G., Badnaoui, A. A., & Schwarzkopf, R. (2020). Evaluation of the bone morphology around four types of porous metal implants placed in distal femur of Ovariectomized rats. https://doi.org/10.21203/rs.3.rs-33209/v1
  15. Ran, Q., Yang, W., Hu, Y., Shen, X., Yu, Y., Xiang, Y., & Cai, K. (2018). Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes. Journal of the Mechanical Behavior of Biomedical Materials, 84, 1-11. https://doi.org/10.1016/j.jmbbm.2018.04.010
  16. Van Bael, S., Chai, Y., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J., & Schrooten, J. (2012). The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomaterialia, 8(7), 2824-2834. https://doi.org/10.1016/j.actbio.2012.04.001
  17. Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., … & Matsuda, S. (2016). Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. Materials Science and Engineering: C, 59, 690-701. https://doi.org/10.1016/j.msec.2015.10.069

How to Cite

Korzh, M., Makarov, V., Shidlovsky, M., Yermakov, V., Nikitin, Y., Pidgaiska, O., Tankut О., Karpinsky, M., Karpinska, O., Zakhovayko, O., & Chupryna, D. (2023). Experimental study of the strength of hip endoprosthesis elementsmade by 3D printing. ORTHOPAEDICS TRAUMATOLOGY and PROSTHETICS, (4), 12–17. https://doi.org/10.15674/0030-59872020412-17

Issue

Section

ORIGINAL ARTICLES