Graph analytical study of the possibility of prevention and treatment of dislocation of the hip joint head because of the incorrect position of its components

Authors

  • Oleh Ovchynnikov

DOI:

https://doi.org/10.15674/0030-59872017223-29

Keywords:

hip joint, dislocation of endoprosthesis head, graphoanalytical modeling, mechanism, large diameter head, liner with visor

Abstract

Objective: to determine the mechanisms of the disloca­tion of the head of the hip joint endoprosthesis on the basis of the graphoanalytic modeling method and to correct the wrong position of its components.

Methods: graphical-analytical model­ing.

Results: it has been established that there are two mecha­nisms of dislocation of the head of the hip joint endoprosthesis, related to its size and compliance with the angles of inclination and anteversion of the cup and antithesis of the endoprosthesis stem. The loss of contact area can also occur due to the wear of the friction pair. The most stable are endoprostheses with large-diameter heads, which allow increasing the shoul­der strength, which counteracts the disabling effect. As a mea­sure to prevent dislocations, you can use liners with a visor that prevent the dislocation of the head or neck of the endo­prosthesis of a reduced diameter. If the endoprosthesis cup has too much angle of inclination or insufficient cup anteversion and/or antithesis of the stem, but there is a stable anchorage, a liner with a visor can also be used. The angle of the movement of the endoprosthesis head due to the use of a liner with a vi­sor decreases with increasing diameter of the heads, which also indicates the advantage of using them to prevent dislocation of the endoprosthesis.

Conclusions: in the hip joint endopros­thetics for the prevention of head dislocation, it is important to observe the correct position of its components. If it is not pos­sible to install the components of the endoprosthesis within the limits that prevent the appearance of dislocation of the head, and also for the purpose of its elimination, it is advisable to use liners with a visor in combination with large diameter heads. The choice of the neck of the endoprosthesis with a reduced di­ameter reduces the risk of its dislocations.

Author Biography

Oleh Ovchynnikov

Sytenko Institute of Spine and Joint Pathology, Kharkiv. Ukraine

shabalov2009@yandex.ru

References

  1. Bronshteyn IN, Semendyaev KA. A handbook on mathematics for engineers and students of VTUZs. 13th edition. Moscow: Nauka, 1986. 544 p. (in Russian)
  2. Vakulenko VМ, Vakulenko АV, Nedelko АА. Dislocations after total hip replacement. Trauma. 2014;15(3):47–55. (in Russian)
  3. Golovanov NN. Geometric modeling. Moscow: Academia, 2011. 272 p. (in Russian)
  4. Zagorodniy NV. Total hip arthroplasty. Basics and Practice. Moscow: GEOTAR-Media, 2012. рр. 503–45. (in Russian)
  5. Loskutov AE, Oleynik AE. Total hip joint arthroplasty: achievements and prospects. Diagnostika ta likuvannya. 2006;(1–2):136–40. (in Russian)
  6. Filipenko VA, Tankut VA, Tankut AV, Zhygun AI Complications of hip-joint arthroplasty. Orthopaedics, Traumatology and Prosthetics. 2010;2:11–6. doi: 10.15674/0030- 59872010211-16. (in Russian)
  7. System analysis in geometric modeling: monograph. Ed. by Kremleva AG. Ekaterinburg : izd-vo UGGU, 2014. 171 р. (in Russian)
  8. Gayko GV, Gerasimenko SI, Polulyah MV, Torchinskiy VP. State and prospects of joints arthroplasty: abstract book of XIV Congress of orthopaedists and traumatologists of Ukraine. Odesa, 2006. рр. 423–5. (in Ukrainian)
  9. Tihilov RM, Shapovalov VM. Manual on hip arthroplasty. Saint Petersburg, 2008. рр. 259–62. (in Russian)
  10. Filippenko VA, Tankut AV. Evolution of the problem of joint grafting. International medical journal. 2009;15,1(57):70–4. (in Russian)
  11. Yavorskiy BM, Detlaf AA, Lebedev AK. Handbook of Physics for Engineers
  12. and university students. 8th ed. Moscow: Izdatelstvo Oniks, 2006. 1056 р. (in Russian)
  13. Courpied JP, Caton JH. Total hip arthroplasty, state of the art for the 21st century. Int Orthop. 2011;35(2):149–50. doi: 10.1007/s00264-011-1207-9.
  14. Coventry MB. Late dislocations in patients with Charnley total hip arthroplasty. J Bone Joint Surg Am. 1985;67-A(6):832–41.
  15. Garbuz DS, Masri BA, Duncan CP, Greidanus NV, Bohm ER, Petrak MJ, Della Valle CJ, Gross AE. Dislocation in revision THA: do large heads (36 and 40 mm) result in reduced dislocation rates in a randomized clinical trial? Clin Orthop Relat Res. 2012;470(2):351–6. doi: 10.1007/s11999-011-2146-x.
  16. Lewinnek GE, Lewis JL, Tarr R, Compere CL, Zimmerman JR. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg. 1978;60-A:217–20.
  17. Berry DJ, Knoch M, Schleck CD, Harmsen WS. Effect of femoral head diameter and operative approach on risk of dislocation after primary total hip arthroplasty. J Bone Joint Surg Am. 2005;87(11):2456–63. doi: 10.2106/ JBJS.D.02860.
  18. European surgical orthopaedics and traumatology. The EFORT Textbook. Ed. G. Bentley. Springer, 2014. рр. 2495–511.
  19. Harris WH. Advances in surgical technique for total hip replacement: without and with osteotomy of the greater trochanter. Clin Orthop. 1980;146:188–204.
  20. Lachiewicz PF, Soileau ES. Dislocation of primary total hip arthro¬plasty with 36 and 40 mm femoral heads. Clin Orthop Relat Res. 2006;453:153–5. doi: 10.1097/01.blo.0000238851.31368.e7.
  21. Lachiewicz PF, Soileau ES. Low early and late dislocation rates with 36- and 40-mm heads in patients at high risk for dislocation. Clin Orthop Relat Res. 2013;471(2):439–43. doi: 10.1007/ s11999-012-2379-3.
  22. Malik A, Maheshwari A, Dorr LD. Impingement with total hip replacement. J Bone Joint Surg Am. 2007;89(8):1832–42. doi: 10.2106/JBJS.F.01313.
  23. Seki M, Yuasa N, Ohkuni K. Analysis of optimal range of socket orientations in total hip arthroplasty with use of computer-aided design simulation. J Orthop Res. 1998;16:513–7.
  24. Tansey RJ, Green GL, Haddad FS. Large diameter heads: is bigger always better? Seminars in Arthroplasty. 2015;26(1):16–9. doi: 10.1053/ j.sart.2015.04.004.
  25. Abdel MP, von Roth P, Jennings MT, Hanssen AD, Pagnano MW. What safe zone? The vast majority of dislocated THAs are within the Lewinnek safe zone for acetabular component position. Clin Orthop Relat Res. 2016;474(2):386–91. doi: 10.1007/s11999-015-4432-5.

How to Cite

Ovchynnikov, O. (2017). Graph analytical study of the possibility of prevention and treatment of dislocation of the hip joint head because of the incorrect position of its components. ORTHOPAEDICS TRAUMATOLOGY and PROSTHETICS, (2), 23–29. https://doi.org/10.15674/0030-59872017223-29

Issue

Section

ORIGINAL ARTICLES